The latest firmware can be downloaded from Google Drive. It is very important that the file name does not change and should appear as KE_DigitalDash_Firmware.hex.
- Remove the Digital Dash from your vehicle.
- Remove the Micro SD card from the Digital Dash, located at the bottom of the Digital Dash near the OEM connector.
- Connect the Micro SD card to a computer and you should see a storage device called
bootappear.
- Click on that device and nagiate to
DigitalDash\DigitalDash-Firmware - Copy
KE_DigitalDash_Firmware.hexinto theDigitalDash\DigitalDash-Firmwaredirectory.
- Once copied you can remove the micro SD card and put it back in the Digital Dash.
The expansion card MUST be installed on the Digital Dash if it is not already.
- Reinstall the Digital Dash into your vehicle and on the first boot it will automatically install the updates. IMPORTANT: Make sure your vehicle is on or in accessory mode. DO NOT TURN YOUR VEHICLE OFF. The update should take less than 2 minutes.